手动压盖机主要适用规格:
8型眼科针剂铝盖
11型、11A型铝盖、铝塑盖
13型2毫升瓶铝盖、13A型2、5毫升瓶铝塑盖
15A（口服液A型）、15型（口服液C型）易拉盖
20型青霉素瓶铝盖、20A型7、10、20、30毫升青霉素瓶铝塑盖
28、28A（T形橡胶塞）50、100、250、500毫升大输液瓶铝盖、铝塑盖
30、30A（翻盖橡胶塞）100、250、500毫升大输液瓶铝盖、铝塑盖
32A型（T形橡胶塞）大输液瓶铝盖、铝塑盖
以及特殊规格定做加工,如香水瓶盖、喷雾剂瓶盖
手动压盖机主要技术参数：
8型、13型、13A型、15型、15A型、20型、20A型、28A型、28B型。
轧盖口径： 8、13.8、15.6、15.9、17.5、20.7、22、31.2、33mm
外型尺寸： 195×80×50mm
重 量： 0.5-0.7kg
手动压盖机使用方法：
1、按上易拉盖或铝盖后,放进轧头内,上下轻轻按手柄,压到轧头收紧为止,（不必过分用力）放松手柄,即恢复原位置。用三手指检查瓶盖不松动即可。
2、如*次轧盖不紧或不光滑,即可调节轧头,顺时针旋转为松,逆时针旋紧为紧。 |
Manual capping machine is mainly applicable specifications:
8 Department of Ophthalmology injection aluminum cover
Type 11, type 11A aluminum cover, aluminum cover
Type 13 2 ml bottles aluminum cover, 2 13A, 5 ml bottle cap
15A （ oral liquid type A ）, type 15 （ oral liquid C type pop-top ）
The 20 type of penicillin bottle aluminum cover, 20A type 7, 10, 20, 30 ml penicillin bottle cap
In 28, 28A （ T shaped rubber plug ） 50, 100, 250, 500 ml of large infusion bottles aluminum cover, aluminum cover
In 30, 30A （ flip rubber plug ） 100, 250, 500 ml of large infusion bottles aluminum cover, aluminum cover
32A （ T shaped rubber plug ） large infusion bottles aluminum cover, aluminum cover
And the special requirements of custom processing, such as perfume bottle, spray bottle
Manual capping machine main technical parameters:
Type 8, type 13, type 15, type 13A, type 15A, type 20, type 20A, type 28A, type 28B.
Cover rolling diameter: 8, 13.8, 15.6, 15.9, 17.5, 20.7, 22, 31.2, 33mm
Dimensions: 195 x 80 x 50mm
Weight: 0.5-0.7kg
Manual capping machine using the method:
In 1, according to the pop-top or aluminum cover, into the rolling head, upper and lower press gently pressure to handle, rolling head tightening so far, （without excessive force ） the handle is loosened, i.e.to restore the original position.With three fingers loose check cap can be.
2, such that the first capping is not tight or not smooth, you can adjust the rolling head, a clockwise rotation for the loose, tighten the tight counterclockwise.
