行业产品

  • 行业产品

长沙宏鸣制药机械设备有限公司


当前位置: 长沙宏鸣制药机械设备有限公司>> 轧盖设备>> 半自动轧盖机>>半自动轧盖机(Semi automatic capping machine)

半自动轧盖机(Semi automatic capping machine)

返回列表页
参  考  价 面议
具体成交价以合同协议为准

产品型号轧盖机系列(Capping machine series)

品       牌

厂商性质生产商

所  在  地长沙市

联系方式:于卫查看联系方式

更新时间:2016-09-28 19:22:53浏览次数:3992次

联系我时,请告知来自


    暂无信息

经营模式:生产厂家

商铺产品:2618条

所在地区:湖南长沙市

联系人:于卫 (经理)

产品简介

适合口服液瓶铝盖、二毫升瓶铝盖、太太口服液瓶铝塑盖、喷雾管铝盖、青霉素瓶铝盖、喷雾管铝盖等轧盖。是全国各大医院,药厂、科研等进行批量生产Z为理想的轧盖设备。

详细介绍

半自动轧盖机的详细资料:
本厂生产的电动轧盖机,整机造型新颖、美观、整机设计合理、轻巧。台面与防护罩均为不锈钢材料制造,滚轮强度大,耐磨损,使用寿命长,所轧的瓶铝盖密封性好。适合口服液瓶铝盖、二毫升瓶铝盖、太太口服液瓶铝塑盖、喷雾管铝盖、青霉素瓶铝盖、喷雾管铝盖等轧盖。是全国各大医院,药厂、科研等进行批量生产zui为理想的轧盖设备。

电动轧盖机主要参数:
轧盖速度:     24~30瓶/分
电机功率:     25W—250W(单机220V)
体    积:     300×200×350mm
415×180×580mm
重    量:     8~40kg

电动轧盖机详细介绍:

一、上臂的调整

该机可用于轧5-500ml的瓶子盖,轧不同规格瓶子时,只要把该规格的瓶子放在托盘上,一手托住横臂,另一只手拧松横臂左边的螺母,使横臂下降或上升,直到轧盖头与瓶盖约20毫米位置时,将螺母拧紧,再用随机带的内六角扳手将托环紧靠横臂后把托环锁紧。(注)拧紧时注意轧盖头与瓶盖位置对正。

二、V型支块的调整

将瓶子放入下V型支型内,将支块上的两个螺钉旋松,将瓶子和下V型块一起移动,直到轧盖头与瓶盖位置对正后,将V型块上的两个螺钉拧紧。

三、具体操作方法

1、把灌好液体并装上盖子的瓶子放到下托盘上,靠在V型支块上,一手扶住瓶子,另一手将手柄朝后往下拉紧,这时托盘托着瓶子向上抬起,直到瓶盖与轧盖头压紧。

2、当瓶盖与轧盖头压紧后,不停地旋转的三把轧盖刀头旋转数圈后,将瓶盖轧紧。(注)电机必须顺时针运转。

3、将手柄朝前推,使轧好盖的盖子随着托盘回到原位,整个操作过程完成,以后每轧一个瓶盖时重复以上的操作即可。

四、轧盖头的调整

该机配有多个轧盖头,可根据不同瓶子盖的大小来选择上轧盖头。正式使用前可用瓶子试一下。

1、盖子轧的不紧,可旋开轧盖头锁紧螺母按逆时针方向旋出上轧盖头,然后锁紧上固定螺母。

2、盖子轧的太紧,有旋切瓶盖现象。可旋开上轧盖头锁紧螺母按顺时针方向旋进上轧盖头,然后锁紧上固定螺母。

3、瓶盖下沿收不紧,可根据实际情况适当调小三个轧刀头的偏心度。如收的太紧,有轧碎瓶子现象,可适当调大三个轧刀头的偏心度。

Semi automatic capping machine details:

Factory production of electric Capping machine, the novel and beautiful shape, reasonable design, compact.Mesa and the protective cover are made of stainless steel materials, roller strength, wear resistance, long service life, the rolling bottle aluminum cover with good sealing performance.Suitable for oral liquid bottle aluminum cover, aluminum cover two ml bottles, oral liquid bottle cap, the spray tube aluminum cover, aluminum cover, penicillin bottle spray tube aluminum cover, cover rolling.Is the country's major hospitals, pharmaceutical companies, scientific research and production the most ideal cover rolling device.

Electric Capping machine main parameters:

Cover rolling speed: 24 ~ 30 bottles per minute

Motor power: 25W - 250W ( 220V single )

Volume: 300× 200 × 350mm

415 x 180 x 580mm

Weight: 8~ 40kg

Electric Capping Machine details:

One, the adjusting arm

The machine can be used for rolling 5-500ml bottle cap, rolling bottles of different specifications, as long as the specifications of the bottle is placed on the tray, a support arm, a cross arm on the left hand to loosen the nut, so that the arm drop or rise, capping and cap until ca.20 mm position, will be tightening of the nut, and then randomly with the inner six angle wrench will support ring abuts the cross arm after the supporting ring lock.(note ) note with the bottle cap when tightening capping position on it.

In two, V type support block adjustment

The bottle into the V type, the supporting block two screw loosening, bottles and V type block move together, until the capping and cap position on it, V block of two screws.

In three, the specific operation method

1, to fill liquid and the bottle lid fitted into the lower tray, on V type support block, one hand holding the bottle, on the other hand will handle back down tight, then the tray of a bottle up, until the bottle cap and the capping presses.

In 2, when the cap and capping after pressing, spinning three cover rolling cutter head rotation after a few laps, the bottle cap can be tightly rolling.(note ) motor must run clockwise.

In 3, the handle forward push, make rolling cover lid with the tray back in situ, the whole operation process is completed, each one a bottle of repeat the above operation.

In four, capping adjustment

The machine is equipped with a plurality of capping, according to different bottle cover size selection on capping.Before using the available bottles to try.

1, cover rolling is not tight, loosen the capping nut lock anti-clockwise rotation on capping, and then lock fixing nut.

2, cover rolling too tight, peeling cap phenomenon.Loosen the lock nut on the capping clockwise rotation in the capping, and then lock fixing nut.

In 3, the bottle cap along not tight, according to the actual situation of the appropriate regulating mistress a rolling cutter eccentricity.Such as receiving tight, a crushing bottle phenomenon, can be appropriate three rolling cutter eccentricity.

关键词: 轧盖机

感兴趣的产品PRODUCTS YOU ARE INTERESTED IN

设计制作,未经允许翻录必究 . Copyright(C) 2021 //www.theloveswami.com,All rights reserved.

以上信息由企业自行提供,信息内容的真实性、准确性和合法性由相关企业负责, 对此不承担任何保证责任。 温馨提示:为规避购买风险,建议您在购买产品前务必确认供应商资质及产品质量。

会员登录

×

请输入账号

请输入密码

=

请输验证码

收藏该商铺

登录后再收藏

提示

您的留言已提交成功!我们将在第一时间回复您~
Baidu
map