RSA7100A实时频谱分析仪

RSA7100A 宽带信号分析仪提供高达 800 MHz 带宽的实时频谱分析、流式传送到多个接口进行记录（长达 2 小时）和以全带宽回放无缝数据的功能。

主要功能

• 16 kHz ~ 14/26.5 GHz 频率范围覆盖了各种分析需求

• 用于高级设计验证的高性能频谱分析,1 GHz 时 -134 dBc/Hz 相位噪声,10 kHz 偏置以及 10 GHz 时 0.5 dB 典型幅度精度

• 标配 320 MHz 实时带宽；标配 3.6 GHz 的内置前端放大器

• 业内秀的实时性能：99% 检测概率检测全部信号电平的 419 ns 信号

• 在 > 3.6 GHz 频率时提供了 800 MHz 采集带宽,满足雷达、通信和频谱管理要求

• 实时触发时域中 4 ns事件、频域中 700 ns事件,确保每次一次就能捕获关心的信号

• IQFlowTM可以从设备向一个或多个客户端连续流式传送 IQ 数据,包括 RAID 和 40 GbE 以及为执行实时 DSP 算法和记录/分析长事件序列提供所需速度和灵活性的 API

• 以全部 800 MHz 带宽把 2 小时（最长 2.75 小时）的捕获信息传送到内置 RAID,实现长事件序列的环境记录和分析

• DataVu-PC 软件分析记录的任意长度的事件,能够标记关心的事件,把波形导出到其他格式,导出 Pulse Descriptor Word (PDW) 信息并执行脉冲分析

• 同时流式传送和实时分析,实时监测记录事件,确保获得所需数据

• 高效快速帧捕获,并消除死区时间,优化内存和分析,从而可以分析更长的测试序列

• 标配实时频谱分析功能及 DPX 频谱/三维频谱图,限度地缩短查找瞬态信号和干扰的时间

• 标准测量包括通道功率、ACLR、CCDF、OBW/EBW、杂散搜索和幅度/频率/相位相对于时间关系,为开发工作提供了一套完整的工具

• SignalVu-PC 应用许可提供了各种分析功能,包括调制、脉冲、WLAN 和频率/相位稳定测量

• 提供内部 GPS 接收仪,用于对事件进行精确时间标记；定时参考源包括GPS、IRIG-B AM、IRIG-B DC 和 1PPS

应用

• 高级雷达/电子战争设计评估

• 环境评估、监测和记录

• 宽带通信设计

• 频谱管理

RSA7100A 为您提供了强大的处理能力,让您尽情想象新的解决方案

RSA7100A 是一种高性能频谱分析仪,重点处理宽带分析和信号记录。通过把 RF 采集与计算引擎分开,可以用图形处理器代替以前要求的 FPGA 设计来完成实时处理。随着处理器功能不断提升,可以通过升级 PC 来简便地保持系统所需的新性能,而不用更换 RF 硬件,从而使得 RSA7100A 成为限度地降低长期成本的智能之选。您还可以在自己的仿真和设计中利用这种 CPU/GPU 组合的处理能力,把仪器作为强大的工作站使用。

RSA7100A 面向的是处理通信、雷达和电子战争宽带设计的工程师,以及在现场运营时需要查看新宽带系统影响的频谱管理人员。

使用两个软件包分析信号。SignalVu-PC 用于实时频谱和矢量分析,DataVu-PC 用来分析记录宽带信号时产生的超大文件集。

SignalVu-PC 软件提供了丰富的分析功能

与 RSA7100 配合工作的是一款强大的程序—SignalVu-PC,这是泰克传统频谱分析仪的基础。SignalVu-PC 提供了深入分析功能,包括实时频谱分析和多种应用软件包。还提供了针对 SignalVu-PC 的编程接口,可对外部程序进行所有测量和设置。免费的 SignalVu-PC 程序的基本功能远远不只是基本功能,还包括以下所示的测量功能。

The RSA7100A broadbａnd signal analyzer provides real-time spectrum analysis up to 800 MHz bandwidth, streaming to multiple interfaces for recording (up to 2 hours), and full-bandwidth playback of seamless data.

The main function

The 16 kHz ~ 14/26.5ghz frequency range covers a variety of analysis requirements

High-performance spectral analysis for advanced design verification, 1-134 dBc/Hz phase noise, 10 kHz bias, and 0.5db typical amplitude accuracy at 10 GHz

Standard 320 MHz real time bandwidth!Standard 3.6ghz built-in front-end amplifier

The industry's best real-time performance: 99% detection probability detection of all signal levels of 419 ns signal

In > 3.6 GHz frequency provides 800 MHz acquisition bandwidth, to meet the requirements of radar, communication and spectrum management

4 ns events in the time domain and 700 ns events in the frequency domain are triggered in real time to ensure that the concerned signal can be captured every time

IQFlowTM can continuously stream IQ data from the device to one or more clients, including RAID and 40 GbE, and an API that provides the speed and flexibility required to perform real-time DSP algorithms and record/analyze long event sequences

2 hours (up to 2.75 hours) of capture information is transmitted to the built-in RAID with full 800 MHz bandwidth for environment recording and analysis of long event sequences

Datavu-pc software analyzes events of any length recorded, can flag events of interest, export waveforms to other formats, export Pulse Descriptor Word (PDW) information, and perform Pulse analysis

Simultaneous streaming and real-time analysis, real-time monitoring of recorded events to ensure that the required data

Efficient and fast frame capture, elimination of dead zone time, optimization of memory and analysis allow for longer test sequences to be analyzed

Standard real-time spectrum analysis and DPX / 3d spectrum to minimize the time required to find transient signals and disturbances

Standard measurements include channel power, ACLR, CCDF, OBW/EBW, spurious search, and amplitude/frequency/phase relative to time, providing a complete set of tools for development efforts

The signalvus-pc application license provides a variety of analysis capabilities, including modulation, pulse, WLAN, and frequency/phase stability measurements

Provide internal GPS receiver for accurate time marking of events!Timing reference sources include GPS, irig-b AM, irig-b DC and 1PPS

application

Advanced radar/electronic warfare design assessment

Environmental assessment, monitoring and recording

Broadbａnd communication design

Spectrum management

RSA7100A gives you the power to imagine new solutions

The RSA7100A is a high-performance spectrum analyzer that focuses on broadbａnd analysis and signal recording.By separating the RF acquisition from the computing engine, a graphics processor can be used to replace the previously required FPGA design for real-time processing.As processor capabilities continue to improve, RSA7100A is the smart choice to minimize long-term costs by simply upgrading your PC to keep up with new performance requirements without replacing your RF hardware.You can also leverage the processing power of this CPU/GPU combination in your own simulation and design, using the instrument as a powerful workstation.

The RSA7100A is aimed at engineers dealing with the latest broadbａnd designs for communications, radar and electronic warfare, as well as spectrum managers who need to see the impact of the new broadbａnd system when operating in the field.

Signals are analyzed using two software packages.Signalvus-pc is used for real-time spectrum and vector analysis, and datavu-pc is used to analyze very large file sets generated when recording broadbａnd signals.

SignalVu-PC software provides rich analysis capabilities

Working with the RSA7100 is a powerful program called signalvu-pc, which is the basis for tektronix's traditional spectrum analyzer.Signalvus-pc provides deep analysis capabilities, including real-time spectrum analysis and multiple application software packages.Signalvus-pc also provides a programming interface for all external program measurements and Settings.The basic functionality of the free signalvus-pc program goes far beyond basic functionality and includes the following measurements.

SignalVu- the measurements and functions included in the basic PC version

General signal analysis description

The spectrum analyzer covers 100 Hz to the full range of the instrument, 3 trajectories + mathematical trajectories and 3d spectrum graph trajectories, 5 markers and functions of power, relative power, integrated power, power density and dBc/Hz

DPX spectrum / 3d spectrum image displays the spectrum in real time, and detects the signal of the longest 419 ns with 99% detection probability in the bandwidth up to 800 MHz

Amplitude, frequency, phase change over time, RF I and Q change over time basic vector analysis function

The time profile/navigator makes it easy to set acquisition and analysis times for in-depth analysis in multiple domains

The spectrum is shown in a two-dimensional or three-dimensional waterfall diagram

Analyze and reanalyze the signal

Description of analog modulation analysis

AM, FM, PM analysis and measurement of key AM, FM, PM parameters

Rf measurement description

Spurious signal measurement user-defined limit line and range provides automatic spectrum violation testing across the instrument range.

Spectrum radiating templates user set templates or specific standard templates.

Occupying 99% of the bandwidth to measure the power, -xdb downlink point.

Channel power and ACLR variable channel and adjacent/circuitous channel parameters.

MCPR perfect flexible multi - channel power measurement.

The CCDF complementary cumulative distribution function plots the statistical variance of the signal level.

Signal strength measures signal strength, displays spectrum and signal strength bars, searches for interference, and evaluates signal quality.