详细介绍
自动检重秤技术参数
Technical specification of the checkweigher
載荷maximum load 600g
分辨率resolutiond=0.1g
精度accuracy +/- 0.2g
(与产品的尺寸、重量,行为、产量及使用环境有关)
(dependent on product size, weight and behaviour, throughput and environmental influence)
产量throughput, up to120件/分钟120weighings per minute
量程weighing range0-600g
传感器weighcell数字信号,免维护,性能稳定,温度影响很小。
, digital, maintenance free, temperature stable
机械性能Mechanical specification
产品输入输入传输带,安装在检重秤的基架上,铝制,400/150mm (轴距/皮带宽)
infeed of productsinfeed conveyor integrally mounted with the checkweigher
made of black anodized aluminium
400/150 mm (distance between axles/belt width)
称量传输带铝制,200/150mm (轴距/皮带宽)
weighing conveyormade of black anodized aluminium
200/150 mm (distance between axles/belt width)
产品输出输出传输带,安装在检重秤的基架上,铝制,400/150mm (轴距/皮带宽)
outfeed of productsoutfeed conveyor integrally mounted with the checkweigher
made of black anodized aluminium
400/150 mm (distance between axles/belt width)l
电机直流无刷马达,集成控制电路,速度可通过触摸屏连续可调。
motor DC brushless motor with integrated control circuitry!speed continuously variable at the touch of a key.
剔除设备吹气式,用于剔除超重/欠重产品,安装于输出传输带上
(超重剔除动作可关闭)
剔除方向：向操作者(请确认)
rejection devicesorting of over- and underweights by air jet mounted on outfeed conveyor(rejection of overweights can be switched off)
(rejection towards the operator side) (please confirm)
压缩空气4-8bar,气耗量：约50升/小时
compressed air4-8bar, air consumption approx.50 l/hour
生产线高度850mm(请确认),标准高度570-1100mm
line height 850 mm (please confirm), standard from 570-1100mm.
地脚螺栓不锈钢材质,高度调节：+/-30mm
foot screws made of stainless steel, height adjustable+/-30mm
传输方向从左向右(操作者面对显示屏)(请确认)
transport directionfrom left to right(see from the operator's side) (please confirm)
使用环境为确保达到精度,检重秤的安装地点应避免震动及空气的流动
ambient conditions to ensure maximum accuracy, the location where the checkweigher is to be installed must be free of vibrations and air draft as far as possible
材质/设计不锈钢立柱支撑,立柱内安装电子、电气和驱动控制系统
material/design stainless steel/self supporting housing as a columnar cabinet, incorporating the electric and electronic systems and the drive control system.
防护等级标准：IP54
ingress protection Standard: IP54
电气性能Electrical specification
电气安装遵循VDE0100和0113
electrical installations corresponding to the VDE guidelines 0100 and 0113
电源要求115/230V,单相,N,PE,50Hz
power supply 115/230 V, single-phase, N, PE, 50/60 Hz
功率wattage500 VA
使用温度0 - 40 ° C
temperature range 0 - 40 ° C
注意自动检重秤的供电电源应单独布线,以确保没有电气和电磁干扰
note The power supply of the checkweigher must be interference-free (EMC,HF) to ensure trouble-free operation.
信号无源触点输出potential-free outputs (designed as "make contact")：
signals -检重秤准备运行weigher is ready
-传输带运行conveyors are running
称重显示仪Weighing terminal
显示仪外壳镶嵌在控制柜上
terminal housing integrated in the control cabinet
显示屏Screen
显示屏高亮度、高对比度彩色液晶触摸显示屏,5.7"
displaybright, high-contact colour touchscreen LC display, size 5.7"
功能分辨率1/4VGA
Function resolution 1/4VGA
显示-当前产品；标准重量和皮重
-当前操作员；时间和日期
Indication - current article!nominal weight and tare
- current operator!time and data
当前重量值大字显示毛重或大字显示净重。
Current weight value large gross weight ondication,or large net weight indication
操作区密码登入和置零
Action section for log-in and re-zeroing
菜单部分Menu section
操作指导触摸屏上显示明晰的操作方法
operator guidance intuitive operation approach by touchscreen display
软开关softkey控制电机开和关/for motor start/stop
HOME键HOME key用于快速退回主页面/for quick jump back to the basic screen
MENU键MEMU key用于打开屏幕菜单/for opening the list of screen
HELP键HELP key用于打开帮助菜单/for context-sensitive help
前进/后退键用于在不同页面间浏览
FORWARD/
BACKWARD key for moving from one screen to another
系统信息按时间和日期显示的系统历史信息
Syetem message history of last system message with date/time
基本显示界面Basic screen
分类计数重量分类显示：每个重量区域内的个数；当前重量分类指示。
Counterlevelsindication of the weight classification: counter levels of each weight zone andindicatethe current weighing
信息栏系统状态和系统信息
Info line system status and system message
