详细介绍
定制型 乙醇甲醇混合溶液XY-GY-10FCIP超低温深冷技术隔板小于-70度
General Detail 总述 |
||
Sr.No. |
Description 描述 |
Specifications 规格 |
1 |
Mode 型号 |
XY-GY-10F (CIP) |
2 |
Output (approx.) 产量(大约) |
40,500 units of vials 16mm diameter 外径16毫米冻干瓶40,500瓶 |
21,500 units of vials 22mm diameter 外径22毫米冻干瓶21,500瓶 |
||
3 |
Maximum ice capacity Z大捕冰力 |
200kg |
4 |
Stoppering 压塞 |
Hydraulic stoppering 液压压塞(选配) |
5 |
Control 控制方式 |
Microprocessor 微机处理【无菌窒增加一套扳层升降操作系统】 |
6 |
Dimension of unit (approx.) (L × W × H) (mm) (with hydraulic cylinder) 外型尺寸(大约)(长×宽×高)(带液压缸) |
5400 ×1650 ×3520 (Final dimension based on design) (以Z终设计尺寸为准) |
7 |
Weight (approx.) 重量(大约) |
8,500kg |
Chamber 冻干箱 |
||
1 |
Chamber type 冻干箱外型 |
Rectangular 长方体 |
2 |
Sloping 箱体倾斜度 |
2% |
3 |
Finish 内部抛光度 |
Ra≤0.4um (0.4Mircon) |
4 |
Corner 箱内角 |
Coping 圆弧角 |
5 |
Validation port 验证孔 |
Included 有(1个)位置箱体顶部 |
6 |
Viewing port 视镜 |
Illuminated 带远射灯【LED广角】 |
Number 数量 |
1 |
|
Location 位置 |
Side 侧面 |
|
Dimension 尺寸 |
DN200 (mm) |
|
7 |
Material 材质 |
|
Internal 内部 |
AISI 304 |
|
Insulation 保温 |
Aluminum silicate and polyisocyanurate foam 硅酸铝和聚氨酯发泡材料 |
|
External cover 外部 |
304 |
|
Door 箱门 |
||
1 |
Finish 抛光度 |
Ra≤0.4um (0.4Mircon) |
2 |
Viewing port 视镜 |
Included 有 |
Number 数量 |
1 |
|
4 |
Open direction 开门方向 |
Right 右开(面对箱门铰链在右) |
5 |
Open angle 开门角度 |
More than 110o 大于110度 |
6 |
Gasket 密封圈 |
0-shaped silicone rubber single gasket 0-型硅橡胶单密封 |
7 |
Locking arrangement 门锁方式 |
Automatic bolts 手动门锁 |
8 |
Material 材质 |
|
Internal 内部 |
AISI 304 |
|
Shelves 板层 (可选带西林瓶防护条) |
||
1 |
Temperature range 温度范围 |
-70°C to + 80°C |
2 |
Temperature sensors (shelves) 板层温度探头 |
2 |
Silicone oil inlet 导热油进口 |
||
Silicone oil outlet 导热油出口 |
||
3 |
Product sensors 产品温度探头 |
3 |
4 |
Number of shelves 板层数 |
9+ 1(upper radiant shelf) (温度补偿板) |
5 |
Dimension (L × W × T) (mm) 板层尺寸 |
1200×900× 20 |
6 |
Total usable area (sq.m) 总使用面积 |
9.72m2 |
7 |
Spacing (mm) 板间距 |
100 |
8 |
Hose of flexible connection 软管连接 |
Welding 焊接 |
9 |
Finish 抛光度 |
Ra≤0.4um (0.4Micron) |
10 |
Level 平整度 |
≤±0.5mm/m |
11 |
Material 材质 |
AISI 304 |
Stoppering Device 液压装置(选配功能) |
||
1 |
Stoppering condition 运行环境 |
Under vacuum or under inert gas 真空或惰性气体保护 |
2 |
Stoppering direction 压塞方向 |
Top to bottom 从上到下 |
3 |
Operation location 操作位置 |
Both in sterile room and machine room 无菌室和机修室 |
4 |
Hydraulic motor 液压电机 |
|
Power motor 电机功率 |
2.2kW |
|
5 |
Hydraulic units 液压组件 |
(电子防滑)德G传感器 |
Oil packing 装油量 |
25L |
|
6 |
Stoppering force 液压力 |
0~1.0bar (adjustable) 可调 |
7 |
Cylinder sealing 液压缸密封 |
Outside chamber of double gaskets 箱外双密封 |
Condenser 冷凝器 |
||
1 |
Condenser type 冷凝器外型 |
Rectangular 长方体 |
2 |
Viewing port 视镜 |
Illuminated 带远射灯【LED广角】 |
Number 数量 |
1 |
|
Location 位置 |
Easily observe the whole inside condenser 容易观察到整个箱体内部 |
|
Dimension 尺寸 |
DN200 (mm) |
|
3 |
Final temperature J限温度 |
≤-85°C |
4 |
Cooling time (+20 to -40°C) 制冷速度(空载) |
≤30 minutes (empty) |
5 |
Sloping 倾斜度 |
1% |
6 |
Finish 抛光度 |
Ra≤0.5um (0.5Mircon) |
7 |
Corner 箱内角 |
Coping 圆弧角 |
8 |
Coiled pipe welding 盘管焊接 |
Orbitally welded 自动焊接 |
9 |
Isolation valve 中隔阀 |
|
Type 外型 |
Mushroom 蘑菇阀 |
|
Size 尺寸 |
DN400 (mm) |
|
Actuator 制动 |
Hydraulic 液压 |
|
12 |
Coiled pipe material 盘管材质 |
AISI304 |
13 |
Material 材质 |
|
Internal 内部 |
AISI304 |
|
Insulation 保温 |
Aluminum silicate and polyisocyanurate foam 硅酸铝和聚氨酯发泡材料 |
|
External cover 外部 |
304 |
|
Shelf Heating / Cooling 板层升温/降温 |
||
1 |
Circulation pump 循环泵 |
|
Brand 品牌 |
WILO |
|
Model 型号 |
TOP SD65/13 |
|
Type 形式 |
Double-motor canned type one standby 双电机屏蔽式(一个备用) |
|
Number 数量 |
1 |
|
Motor power 电机功率 |
1.1kW (×2) |
|
2 |
Plate heat exchanger 板式热交换器 |
|
Brand 品牌 |
Hexnovo |
|
Model 型号 |
120-50EQ |
|
Type 方式 |
Sealed brazed stainless steel 不锈钢封蜂窝式 |
|
Number 数量 |
2 |
|
3 |
Heater 电加热 |
PID control PID 控制 |
4 |
Maximum heating power Z大加热功率 |
15kW |
5 |
Thermal fluid 导热介质 |
Silicone oil 5 cst 粘度5 cst硅油 |
6 |
Shelf cooling time (+25°C to -40°C) 板层制冷速度(空载) |
≤60 minutes (empty) |
7 |
Heating rate 加热速度(大约) |
1°C/min (approx.) |
8 |
Shelves temperature uniformity 板层温度均匀性(空载平衡后) |
≤±1°C (soak stage) |
9 |
Compressor 压缩机 |
|
Brand 品牌 |
BITZER 富士豪意大利 |
|
Model 型号 |
Z30 |
|
Type 方式 |
半封闭活塞 |
|
Number 数量 |
1台 |
|
Motor power 电机功率 |
22.05kW |
|
Brand 品牌 |
BITZER 富士豪意大利 |
|
Model 型号 |
V25 |
|
Type 方式 |
半封闭活塞 |
|
Number 数量 |
1台 |
|
Motor power 电机功率 |
18.4kW |
|
10 |
Refrigerant 制冷剂 |
R404A/R23 |
11 |
Main refrigerating unit 主要制冷元件 |
|
Thermostatic expansion valve 热力膨胀阀 |
Danfoss |
|
Solenoid valve 电磁阀 |
Danfoss |
|
Sight glass 视液镜 |
Danfoss |
|
Water cooling condenser 水冷凝器 |
TEYI |
|
Oil separator 油分离器 |
HONGGUO |
|
Accumulator 汽液分离器 |
HONGGUO |
|
Liquid filter core 液体过滤芯 |
ALCO |
|
Liquid filter cartridge 液体过滤筒 |
HONGGUO |
|
Gas filter core 气体过滤芯 |
ALCO |
|
Gas filter cartridge 气体过滤筒 |
HONGGUO |
|
Pressure meter 压力表 |
Refco |
|
Pressure controller 压力控制器 |
Danfoss |
|
Vibration absorber 避震管 |
PEAKLESS |
|
Vacuum System 真空系统 |
||
1 |
Final vacuum J限真空 |
≤1×10-2mbar |
2 |
Evacuation time 抽气速度 |
≤30minutes (1×103mbar to 1×10-1mbar) |
3 |
Leakage rate 泄露率 |
≤3×10-2mbar•lit/sec |
4 |
Oil pump 泵 |
|
Brand 品牌 |
Edwards(干泵) |
|
Model 型号 |
GV80×2 |
|
Type 方式 |
DRY-rotary 真空泵 |
|
Number 数量 |
2 |
|
Flow rate 排气速度 |
80m3/hr (×2) |
|
Motor power 电机功率 |
3.6Kw (×2) |
|
5 |
Pump isolation valve 泵阀隔离阀 |
|
Brand 品牌 |
Valbia意大利 |
|
Type 方式 |
Butterfly 碟阀 |
|
Number 数量 |
1 |
|
Size 尺寸 |
DN80 (mm) |
|
Actuator 制动 |
Pneumatic 气动 |
|
7 |
Anti-suction valve 真空防倒吸阀 |
Included 有 |
Pneumatic Units 气动元件 |
||
1 |
Gas source disposal units 气源处理元件 |
中国台湾亚德客AIRTAC |
Venting Filter 放气呼吸器 |
||
1 |
Filter 呼吸器 |
|
Aperture 孔径 |
0.22um |
|
2 |
掺气微调阀 |
SIEGV 西玛特 |
CIP/ De-icing 在位清洗化霜 |
||
1 |
Water-ring pump 水环泵 |
|
Brand 品牌 |
ZIBO |
|
Model 型号 |
MC-90 |
|
Type 方式 |
Water-ring vacuum 水环真空式 |
|
Number 数量 |
1 |
|
Motor power 电机功率 |
2.2kW (×1) |
|
2 |
Sprayer 喷头 |
Ball type 旋转球喷【箱体】 |
3 |
Nozzle 喷嘴 |
Wide-angle type 广角式【箱体】【捕水器内采用喷淋架多头】 |
4 |
cleaning water inlet valves 清洗水进口阀 |
|
Brand 品牌 |
Valbia |
|
Type 方式 |
Butterfly 碟阀 |
|
5 |
cleaning water outlet valves 清洗水出口阀 |
|
Brand 品牌 |
Valbia |
|
Type 方式 |
Butterfly 碟阀 |
|
Pipe welding 管道焊接 |
自动管-管轨迹焊接 |
|
Control System 控制系统 |
||
1 |
Software 软件 |
XY– 5000【可随时免费升级】 |
Automatic 自动 |
Included 有 |
|
Manual 手动 |
Included 有 |
|
2 |
PLC 可编程控制器 |
Omron |
3 |
Computer 电脑 |
联想 |
4 |
Touch screen 触摸屏 |
Omron |
5 |
Vacuum gauge 真空探头 |
EDWARDS |
6 |
Temperature probe 温度探头 |
Pt100 |
7 |
Breaker 空开 |
schneider |
8 |
Contactor 接触器 |
schneider |
9 |
Relay 继电器 |
schneider |
Safety System 安全系统 |
||
1 |
Vacuum failure protection 真空失败保护 |
Included 有 |
2 |
Temperature failure protection 温度失败保护 |
Included 有 |
3 |
Compressor protection 压缩机保护 |
Included 有 |
4 |
Other motors protection 其它电机保护 |
Included 有 |
5 |
Interlock protection 连锁保护 |
Included 有 |
Utility Requirement (approx.) 共用工程消耗(大约) |
||
1 |
Electricity - total electrical load 总装机功率 |
60kW (380V, 50Hz, 3Phase, 5Wire) |
2 |
Cooling water for refrigerant cooling 用于制冷系统的冷却水 |
20m3/hr (1.5≤P≤2bar, T≤25°C) |
3 |
Water for injection for chamber cleaning 冻干箱纯化水清洗 |
290L/min (P≥5bar, T=80°C) |
4 |
Compressed air for pneumatic valves 用于气动阀的压缩空气 |
50L/min (6≤P≤8bar) |
附件二: 备品备件
序号 Serial number |
名称 Name |
型号/规格/材质 Model/Specifications/Material |
数量 Number |
1 |
用于压缩机的加液表套数Set of manifoldmeter for compressor |
1套 |
|
2 |
冷冻机油 Refrigeration oil |
BITZER |
5.0L |
3 |
电磁阀 Solenoid valve |
DANFOSS |
2只 |
4 |
电磁阀线圈 Solenoid valve coil |
DANFOSS |
2只 |
5 |
测温探头 Temperature probe |
PT-100单支 |
2只 |
6 |
高压压力表 High-pressure gage |
REFCO |
1个 |
7 |
低压压力表 Low-pressure gage |
REFCO |
1个 |
8 |
干燥过滤器芯H48 Dry filter core |
ALCO |
1个 |
9 |
干燥过滤器芯D48 Dry filter core |
ALCO |
2个 |
10 |
真空泵油 Vacuum pump oil |
EDWARDS |
--- |
11 |
大门密封圈 |
硅橡胶 |
1根 |
12 |
干燥箱视镜玻璃 Glass of chamber viewing port |
DN-200 |
2块 |
13 |
制冷专用板手 Special wrench for cooling |
1把 |
|
14 |
视镜密封圈 |
2根 |
|
15 |
大油缸密封圈 Gasket for the bigger cylinder |
1套 |