油/眼药水灌装机

本生产线由全自动理瓶机、滚筒式洗瓶机、灭菌干燥机、眼药水灌装旋盖机、立式贴标机组成,可完成理瓶、水、气的清洗、烘干及臭氧消毒、灌装、加塞、旋盖、贴标等工序,主要用于眼药水及其他小剂量溶液的联线生产,也可单机独立使用。*符合GMP要求。 在线询价

用途与简介：

本生产线由全自动理瓶机、滚筒式洗瓶机、灭菌干燥机、眼药水灌装旋盖机、立式贴标机组成,可完成理瓶、水、气的清洗、烘干及臭氧消毒、灌装、加塞、旋盖、贴标等工序,主要用于眼药水及其他小剂量溶液的联线生产,也可单机独立使用。*符合GMP要求。

Brief Introduction：

This production line consist of  Automatic Bottle Unscrambler,  Bottle Washing Machine, Tunnel Type Sterilization Drier, eyedrop filling machine, Vertical Labeling machine, can complete bottle sorting, water,ａnd gas cleaning, drying and ozone disinfection, filling, plugging, capping, labeling, mainly used in eyedrops and other small doses of solution, also can be used single independently.Meet the GMP requirement.

特点：

v本机组设计结构合理,运行稳定、灌装精度高,具国内同行业*水平。*符合GMP标准。

v眼药水灌装旋盖机已是我公司的第三代产品,人机界面控制,蠕动泵灌装,由真空吸机械手代替气缸更好的打塞,保证了稳定性和合格率。采用恒扭矩旋盖,具有无瓶不灌装、无塞不上盖,无瓶无塞可自动停机的功能。

Characteristic：

1.It with reasonable structure, higher precision in filling, reaching the advanced level in domestic same business.Meet with requirement of GMP standard completely.

5.eyedrop filling capping machine is a third generation product, human-machine interface operation, filling by peristaltic pump, replace air cylinder with vacuum drived manipulator for plugging, aquire higherstability and percent of pass.Constant torquecap screwing.No bottle no filling, no plug no capping and automatically stop if cap and plug is under-supply.

技术参数：

适用规格2-30ml

生产能力40-60瓶/分70-120瓶/分

用水压力0.3Mpa

用水量0.5 m³/h

洁净压缩空气压力0.6-0.8Mpa

洁净压缩空气用量300 L/min

电源380V/50Hz

功率5.5 kw

生产线总长11000*1500*1900mm

Main Technical Parameters：

Filling Volume 2-30ml

Productivity 40-60bottles/min70-120bottles/min

Water Pressure 0.3Mpa

Total Power 0.5 m³/h

Compressed Pressure 0.6-0.8Mpa

Compressed Air Wastage 300 L/min

Power Supply 380V/50Hz

Total Power 5.5 kw

Dimension 11000*1500*1900mm