● 抓获式夹头设计地缩短轴向管运动的夹紧/松开周期
● 通光孔便于产品馈通
● 整体安装功能支持客户提供的湿式切割配件
● 直驱无刷电机和编码器
The collet chucks on the CCS family of stages accept C (for CCS190DR) or D-style/Levin (for CCS130DR) collets.These collets are readily available from machine-tool component suppliers in sizes that support tube diameters from 0.1 mm to 27 mm and provide outstanding run-out characteristics for applications requiring high-precision gripping of tubular material.
CCS features a unique collet-chuck design that allows workpiece advance without manual realignment to compensate for axial tube motion during clamp/unclamp cycles.By moving the taper around the collet instead of drawing the collet into the taper, axial motion of the workpiece is significantly reduced, eliminating the need for part re-registration after tube advancement.
The CCS family is designed with mounting features on the housing to support customer supplied wet-cutting accessories.In addition, the stage is designed to tolerate moderate fluid leakage into the aperture, which is inevitable during wet-cutting operations, to prevent encoder contamination and collet-chuck failure.
To maximize positioning performance the CCS series uses direct-drive brushless motor technology.Direct-drive technology is optimized for 24/7 production environments, with no brushes to replace and no gear trains or belts to maintain.Direct-drive also provides quicker acceleration and higher top speeds than gear- or belt-driven mechanisms, yielding higher total overall throughput.