官方微信|手机版|本站服务|买家中心|行业动态|帮助

产品|公司|采购|招标

进口耐腐蚀污水泵

参考价 面议
具体成交价以合同协议为准
  • 公司名称深圳市凯士比阀门有限公司
  • 品       牌
  • 型       号
  • 所  在  地深圳市
  • 厂商性质经销商
  • 更新时间2024/9/6 7:48:44
  • 访问次数60
产品标签:

在线询价 收藏产品 查看电话 同类产品

联系我们时请说明是上看到的信息,谢谢!

深圳市凯士比阀门有限公司主要产品有:闸阀,截止阀,蝶阀,止回阀,球阀,减压阀,调节阀,安全阀,隔膜阀,定位器,疏水阀,旋塞阀,电磁阀,排污阀,气瓶阀,真空阀,切断阀,多用阀,管夹阀,仪表阀底阀,燃气阀,控制阀,浆液阀,浆料阀,平衡阀,针型阀,三通阀,调压阀,排渣阀,排泥阀,呼吸阀,水封阀,卸灰阀,浆渣阀,电站阀门,衬氟阀,放料阀,浮球阀,自控阀,陶瓷阀,插板阀,保温阀,百叶阀,盲板阀,泥浆阀,氢气阀,柱塞阀,吸气阀,换向阀,电动阀门,进气阀,铜阀,电动头,过滤器,塑料阀门,排气阀,液压阀,刀闸阀,瓶阀,气动阀门,比例阀,单向阀,角阀,止水阀,*阀,特殊阀,进口阀,卫生阀门,美标阀门,玻璃钢阀门,阀门合,锻钢阀门,水力控制阀,不锈钢阀门,耐腐蚀阀门,通风阀门,液位计等系列、高温高压阀门、水力控制阀系列、食品*阀等。并可根据用户特殊要求冶炼和制造。阀门材质有:不锈钢、铸钢、碳钢WCB、WC6、WC9、304、304L、316、316L等。阀门规格:DN15-DN1200。压力:1.0-70.0Mpa 驱动方式可采用手动、电动、气动、齿轮传动等装置。标准:国标、美标、日标、德标。   深圳市东泽阀门经营进口阀门有:美国阀门美国VT富特阀门、日本阀门日本KITZ北泽阀门,日本VENN阀天阀门、日本HITACHI日立阀门、德国阀门德国WILLIE威利阀门, 德国WAYEN韦恩阀门, 德国LIK莱克阀门 、英国阀门英国UK优科阀门、法国阀门、意大利阀门、中国台湾阀门、等*阀门。   深圳市东泽阀门产品应用广泛,无论化工、石化、石油、制药、水处理、给排水、市政、造纸、采矿、电厂、液化气、食品、机械设备配套、电子工业,还是商业建筑以及一般工业领域可以信赖的阀门供应商。  深圳市东泽阀门阀门主要零配件及成品经过严格检验及试验后,按阀门行业标准调试合格后才能出厂,产品性能可靠、质量优良、售后服务及时,得到用户的高度赞誉和信赖  深圳市东泽阀门阀门宗旨:求实、真诚的为您提供优质、高效的服务!   深圳市东泽阀门阀门正以创新、引进、吸收*进阀门生产技术,满足用户对高级阀门的需求!
闸阀,截止阀,蝶阀,止回阀,球阀,减压阀,调节阀,安全阀,隔膜阀,定位器,疏水阀,旋塞阀,电磁阀,排污阀,气瓶阀,真空阀,切断阀,多用阀,管夹阀,仪表阀底阀,燃气阀,控制阀,浆液阀,浆料阀,平衡阀,针型阀,三通阀,调压阀,排渣阀,排泥阀,呼吸阀,水封阀,卸灰阀,浆渣阀,电站阀门,衬氟阀,放料阀,浮球阀,自控阀,陶瓷阀,插板阀,保温阀,百叶阀,盲板阀,泥浆阀,氢气阀,柱塞阀,吸气阀,换向阀,电动阀门,进气阀,铜阀,电动头,过滤器,塑料阀门,排气阀,液压阀,刀闸阀,瓶阀,气动阀门,比例阀,单向阀,角阀,止水阀,专用阀,特殊阀,进口阀,卫生阀门,美标阀门,玻璃钢阀门,阀门合,锻钢阀门,水力控制阀,不锈钢阀门,耐腐蚀阀门,通风阀门,液位计等系列、高温高压阀门、水力控制阀系列、食品专用阀
进口耐腐蚀污水泵由水泵、密封和电动机三部分组成,电动机位于电泵上部,为单相或三相异步电动机,水泵位于电泵下部,叶轮为多叶片旋流式结构,叶轮与涡壳底部间有宽敞的通道,能通过任何进入吸入口的杂物
进口耐腐蚀污水泵产品信息
进口耐腐蚀污水泵由水泵、密封和电动机三部分组成,电动机位于电泵上部,为单相或三相异步电动机,水泵位于电泵下部,叶轮为多叶片旋流式结构,叶轮与涡壳底部间有宽敞的通道,能通过任何进入吸入口的杂物。水泵与电机之间采用硬质耐磨机械密封,各固定止口处采用"O"形耐油橡胶密封圈作静密封。
产品特点
1、外壳由304不锈钢及工程塑料构成,与介质接触的螺钉采用304不锈钢;
2、电泵转轴采用316不锈钢,具有优异的耐磨性和耐腐蚀性;
3、不堵塞叶轮设计,进入吸水口的杂物可以全径通过,不易被杂物卡死;
4、电机采用F级绝缘,内配有热保护器,能在电泵缺相、过载、电机过热等情况下
能有效保护电机;
5、由于叶轮与涡壳间具有极为宽敞的流道空间,叶轮旋转产生的强烈涡流
能将介质中的固体颗粒直接送出涡壳而不与叶轮接触,极大的减少了叶轮的磨损。
产品用途
1、海洋养殖业、海洋船舶等海水的抽送
2、住宅区、工业废水的排放
3、农业、水产养殖的清水抽送
4、其他场合之供排水
不适用于建筑工地、矿山等场所抽送含砂粒等坚硬颗粒的介质之用。
使用条件
1.水温0~40℃
2.水源的酸碱度PH值为4~10
3.介质密度不超过1.05×103kg/m3
4.电源电压:单相为220V,三相为380V,频率50HZ,电压波动范围为额定值的0.9-1.1
Corrosion-resistant sewage pump consists of water pump, seal and motor three parts, the motor is located on the pump
Department, for the single-phase or three-phase asynchronous motor, the pump is located in the lower part of the pump, the impeller for multi-blade swirl structure,
There is a spacious passage between the impeller and the bottom of the volute, through any debris entering the suction port.Water pump and motor
Between the use of hard wear-resistant mechanical seal, the fixed stop at the "O" -shaped oil-resistant rubber seal for static seal.
Features
1, the shell made of 304 stainless steel and engineering plastics, and the media in contact with the screw 304 stainless steel;
2, the pump shaft with 316 stainless steel, with excellent wear resistance and corrosion resistance;
3, do not plug the impeller design, into the mouth of the debris can be the whole path through, not easy to be debris stuck;
4, the motor using F-class insulation, with a thermal protector, can be in the pump phase, overload, motor overheating, etc.
Can effectively protect the motor;
5, due to the impeller and the volute between the very spacious flow channel space, the impeller rotation of the strong eddy
The solid particles in the medium can be sent directly to the volute without contact with the impeller, greatly reducing the impeller wear.
Product Usage
1, marine aquaculture, marine ships and other sea water pumping
2, residential areas, industrial wastewater discharge
3, agriculture, aquaculture water pumping
4, other occasions for the drainage
Not suitable for construction sites, mines and other places pumping sand and other hard particles of the medium.
Conditions of Use
1.Water temperature 0 ~ 40 ℃
2.The pH value of the water source is 4 ~ 10
3.Medium density of not more than 1.05 × 103kg / m3

4.Power supply voltage: single-phase 220V, three-phase 380V, frequency 50HZ, the voltage fluctuation range of the rated 0.9-1.1

德国汉克(HANK) 成立于1852年创建于门兴格拉德巴赫(Monchengladbach)是位于德国北莱茵-威斯特州杜塞尔多夫市以西的一座城市。于19世纪50年代初德国经济快速发展,由于德国能源短缺,政府在节能方面加大力度,因此HANK(Trouble Less pump的水泵)公司成立。汉克水泵是以生产高品质、的水泵、测量及控制系统而的跨国性生产企业,在几十个国家拥有子公司及分支机构,公司产品涉及用途:石油、化工、电力、冶金、制药、食品、水处理、市政给排水、天然气、造纸、电子工业、楼宇、机械设备配套等领域。

GERMANY HANK PUMP LIMITED is founded on 1852 in Monchengladbach,which is located at one city in North Rhine in Germany, which is the west of Nordrhein-Westfalen.At the beginning of 1850s, as the rapid development of economic and the shortages of energy in Germany , the government had been in saving energy aspect.On this occasion, HANK Pump (Trouble Less Pump) was established.Hank pump is the world-famous transnational production enterprise,which produces high quality and advanced pump, measurement and control system, and which has its divisions and branches in dozens of countries in the global.The company products user involves the petroleum, the chemical industry, the electric power, the metallurgy, the drugs manufacture, food, the water treatment, the municipal administration to give draining water, the natural gas, the papermaking, the electronics industry, the building, the mechanical device necessary ect..

德国汉克(HANK)水泵的价值理念概括为:责任-远见-创新。我们因自身的责任感、远见及专注于创造的解决方案和理念,而成为的水泵制造商。
The conclusion of the pump concept in German Hank pump is resposibility,foresight,innovation.For ourselves resposibility, foresight and focusing on creating unprecendented solution and concept,our company has become the lead of pump manufacturer in the global.

关键词: 污水泵
在找进口耐腐蚀污水泵产品的人还在看

提示

×

*您想获取产品的资料:

以上可多选,勾选其他,可自行输入要求

个人信息:

Baidu
map