射流粉碎机

LNJP系列射流粉碎分级机是我公司针对产品粒度较粗,有特定粒度段要求、成品率要求高的产品而开发的一种全新粉碎分级机(产品),该机型主要具有成品率高、能耗低、粒度均匀稳定等优势。广泛用于玻璃微珠、金属硅粉、石墨粉(电池负极材料)的生产。

◆采用我公司流能技术研究所开发的流体力学软件,计算出*合适的流场,*理想的压力分布来指导设计,喷流能的充分利用及粉碎强度控制技术,极大的提高了粉碎效率,降低了能耗,过粉碎小；

◆成品率高：该设备与目前市场上常规的磨粉机相比,成品率提高了8-15个百分点。

◆能耗低：装机功率小、单位能耗低,比常规气流磨低40%；

◆耐磨性好：二次风采用专门的设计,使二次进风全段面均匀流,保持清洗流场均匀稳定,大大的降低了磨损。

■应用领域

◆主要应用于有特定粒度段要求的产品,成品率要求高的物料

◆典型物料有：玻璃微珠、金属硅、石墨等...

LNJP New Jet Mill and Classifier is a newly grinding classifier( patent product)for coarser particle, specific size requirement, and high yield material, with advantages of high output, lower energy consumption, particle size concentrating distribution, it is widely used glass beads, metallic silicon powder, graphite powder etc.

1.Fluid dynamics software is developed by our independent R&D, calculated the perfect flow and ideal pressure distribution, combined the advantages of fluid dynamics technology and crushing strength control technology, greatly improve grinding efficiency and reducing energy consumption.

2.High capacity:compare with other grinding machine,the output of this equipment has improved 8~15 percentage.

3.Low energy consumption: Low energy consumption power, saving 40% over the equipments

4.Wear-resistance, secondary air entry keeps the cleaning flow stability, greatly reduce the wear.

■Application

Apply in requirement for the specific granularity and high yield material.

Glass beads, metallic silicon, graphite etc...